Compaq ProLiant Storage System U1 Guia do Utilizador descarregar pdf (Página 61)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4-2 Troubleshooting

Compaq ProLiant Storage System /U User Guide

Fan Array Module

Check to see if the status indicator on the fan array module is amber.

TROJ014.EPS

Fan Status Indicator

Figure 4-2. Fan status indicator

If this indicator is amber, replace the fan module as soon as possible. See

“Replacing Components” later in this chapter for important information on how

to replace this module. Failure to observe these instructions can result in

component damage.

CAUTION:

Do not allow the system to operate for more than two minutes

without a working fan module in place. Operation longer than this with no

forced air cooling, especially in systems with a full complement of drives,

may permanently damage the drives or electronics in the storage system

and result in data loss.

If you will be hot-plugging the fan array module, be sure to have everything

ready before you begin the procedure, which should normally take no more

than one minute.

1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 109 110

Sem comentários

Compaq ProLiant Storage System U1 Guia do Utilizador Página 61