Compaq 2000fc Guia de Resolução de Problemas descarregar pdf (Página 39)

Quick Troubleshooting Guide A-9

Memory

Problem Possible Solution

System won't boot or does not

function properly after installing

additional memory modules

Memory module is not the correct type or speed grade for the system.

Replace module with an industry-standard, SPD-compliant 168-pin

synchronous dynamic random access memory (SDRAM) DIMM that

meets the following criteria (if you do not know the system bus speed,

run Computer Setup to determine it):

System Bus

66 MHz

Rated for 66 MHz or faster

operation.

Has an access time (CLK to Q)

of 9nS or less.

Supports CAS latency 2 or 3

operation.

100 MHz

Rated for 100 MHz or faster

operation.

Has an access time (CLK to Q)

of 6nS or less.

Supports CAS latency 2 or 3

operation.

Out of Memory error. 1. Memory configuration may not be set up correctly; check memory

configuration using Device Manager.

2. The computer has run out of memory for the application. Check the

application documentation to determine the memory requirements.

Memory count during POST is

wrong.

Memory modules may not have been installed incorrectly or non-

SDRAM DIMM modules may have been used.

Insufficient memory error during

operation.

1. Too many Terminate and Stay Resident programs (TSRs) are

installed. Delete any unnecessary TSRs.

2. There is not enough memory for the application. Check the memory

requirements for the application or add more memory.

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 51 52

Sem comentários

Compaq 2000fc Guia de Resolução de Problemas Página 39