Compaq 2000fc Guia de Resolução de Problemas Página 22

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
Vista de página 21
Quick Troubleshooting Guide 2-11
10. Error Messages, Part 3
Error 162, 2S Beeps. System Option not set. Select F1. If error occurs after
reboot, unplug and open computer and check CMOS jumper setting.
Error 163. Time & Date Not Set. Set time and date in F10 or boot to O/S and set
time and date. If error occurs after reboot, unplug and open computer, then check
CMOS setting.
Error 2xx. Memory Error. See Appendix B for specific definitions. Unplug, open
computer, and reseat memory modules. Ensure modules are correct type and that
they match in size and speed.
Error 30x. Keyboard Error. See Appendix B for specific definitions. Do not type
on keyboard before POST. Ensure keyboard connected to proper connector.
Error 6xx. Floppy Error. See Appendix B for specific definitions. Unplug, open
computer, check diskette drive, and check and reseat power and data cables.
Error 91x. Misc. Connection Error. See Appendix B for specific definitions.
Unplug, open computer, and check hood lock coil, thermal sensor pigtail, and riser
for good connection.
Error 178x. Fixed Disk Error. See Appendix B for specific definitions. Unplug,
open computer, check the hard drive, and check and reseat power and data cables.
Error 1800. Thermal Alert. System overheating. Let computer cool off. Ensure
processor has heatsink installed and that speed setting on system board is correct.
Remove obstructions to air vents.
Notes: Short (S) and long (L) beeps will only be
heard if the system has a speaker.
LEDs will only function on PS/2 keyboards, not USB.
x=Numbers1-9
Caution: Power is continuous to the system board and power
supply even when the power switch is turned off. To prevent
damage to the unit, disconnect the power cord from the power
source or the unit before beginning disassembly procedures.
Continued from
page 2-10,
Error Messages, Part 2
All other POST error messages - refer to Appendix B for definitions and
solutions.
Find Error Code
Click Here to Find Error Code
Vista de página 21
1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 51 52

Comentários a estes Manuais

Sem comentários