Compaq Contec COM-2(PC)F Manual do Utilizador descarregar pdf (Página 27)

How to Use the Board

COM-2(PC)F18

Operating under Windows NT

This section describes the procedure for using the board under

Windows NT and lists a number of points to note.

Procedure

First, set the operation mode (I/O address) and interrupt level for

the COM-2(PC)F. Set the COM-2(PC)F switch and jumpers as

described in Hardware Setup.

When using the board in compatible mode, the OS must be set to

recognize the I/O address and interrupt level used by the

COM-2(PC)F. Use the Ports icon in Control Panel to set the I/O

address and interrupt level.

The I/O address and interrupt level used by the COM-2(PC)F do not

need to be set for the OS when using the board in enhanced mode.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 76 77

Sem comentários

Compaq Contec COM-2(PC)F Manual do Utilizador Página 27