Compaq MultiSeat ms6005 Guia do Utilizador descarregar pdf (Página 72)

9. Before installing an expansion card, remove the expansion slot cover or the existing expansion

card.

NOTE: Before removing an installed expansion card, disconnect any cables that may be

attached to the expansion card.

a. If you are installing an expansion card in a vacant socket, remove the appropriate expansion

slot cover on the back of the chassis. Pull the slot cover straight up then away from the inside

of the chassis.

Figure 3-11 Removing an Expansion Slot Cover

b. If you are removing a standard PCI card or PCI Express x1 card, hold the card at each end,

and carefully rock it back and forth until the connectors pull free from the socket. Pull the

expansion card straight up from the socket (1) then away from the inside of the chassis to

release it from the chassis frame (2). Be sure not to scrape the card against the other

components.

Figure 3-12 Removing a Standard PCI Expansion Card

64 Chapter 3 MultiSeat ms6200 Desktop Hardware Upgrades

1 2 ... 67 68 69 70 71 72 73 74 75 76 77 ... 108 109

Sem comentários

Compaq MultiSeat ms6005 Guia do Utilizador Página 72