Compaq MultiSeat ms6005 Guia do Utilizador descarregar pdf (Página 29)

Removing or Installing an Expansion Card

The computer has one PCI expansion slot, two PCI Express x1 expansion slots, and one PCI Express

x16 expansion slot.

NOTE: The PCI and PCI Express slots support only low profile cards.

Figure 2-10 Expansion Slot Locations

Table 2-2 Expansion Slot Locations

Item Description

1 PCI expansion slot

2 PCI Express x16 expansion slot

3 PCI Express x1 expansion slot

4 PCI Express x1 expansion slot

NOTE: You can install a PCI Express x1, x4, x8, or x16 expansion card in the PCI Express x16 slot.

To install an expansion card:

1. Remove/disengage any security devices that prohibit opening the computer.

2. Remove all removable media, such as compact discs or USB flash drives, from the computer.

3. Turn off the computer properly through the operating system, then turn off any external devices.

4. Disconnect the power cord from the power outlet and disconnect any external devices.

CAUTION: Regardless of the power-on state, voltage is always present on the system board as

long as the system is plugged into an active AC outlet. You must disconnect the power cord to

avoid damage to the internal components of the computer.

Removing or Installing an Expansion Card

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 108 109

Sem comentários

Compaq MultiSeat ms6005 Guia do Utilizador Página 29