Compaq StorageWorks 2/24 - Edge Switch Guia de Instalação descarregar pdf (Página 76)

2-50 edge switch 2/32 installation guide

Installing and Configuring the Edge Switch 2/32

Task 13: Test Remote Notification (Optional)

If the call-home and e-mail notification features are enabled, set up the HAFM

application to test these remote notification features. Because the features are

configured at the HAFM application, call-home and e-mail notification are enabled for

multiple switches or HP managed products. To test remote notification:

1. Close the Hardware View page for the switch and return to the Product View

page by closing the window.

2. At the Product View page, choose Maintenance > Test Remote Notification.

The Test Remote Notification dialog box displays, as shown in Figure 2–35.

Figure 2–35: Test Remote Notification dialog box

3. Choose Call Home and E-Mail to perform applicable tests.

The call home test provides a test notification message to a remote support center.

Depending on the option chosen during HAFM installation, the test notification

message is transmitted over telephone lines or LAN.

4. Click Send Test. Call-home and e-mail test messages are transmitted and an

Information dialog box displays, as shown in Figure 2–36. Click OK to close the

dialog box.

5. Verify with recipients that call-home and e-mail notifications were received.

Figure 2–36: Information dialog box

1 2 ... 71 72 73 74 75 76 77 78 79 80 81 ... 143 144

Sem comentários

Compaq StorageWorks 2/24 - Edge Switch Guia de Instalação Página 76