Compaq StorageWorks 2/24 - Edge Switch Guia de Instalação descarregar pdf (Página 66)

2-40 edge switch 2/32 installation guide

Installing and Configuring the Edge Switch 2/32

2. To enable transmission of trap messages to configured SNMP management

workstations, click Enable Authorization Traps. A check mark displays in the

box when transmission is enabled, as shown in Figure 2–27.

Figure 2–27: Configure SNMP dialog box—Enable Authorization Traps

3. Click Activate to save the information and close the dialog box.

Configure and Enable E-mail Notification

Perform this procedure to configure and enable e-mail addresses and simple mail

transfer protocol (SMTP) server addresses to receive e-mail notification of switch (and

other managed product) events. The addresses must be configured at the HAFM

application, then enabled. See “Task 13: Test Remote Notification (Optional)” on

page 2–50 for instructions on testing this notification feature.

To configure and enable e-mail and SMTP server addresses:

1. At the Product View page, choose Maintenance > Configure E-Mail. The

Configure E-Mail dialog box displays, as shown in Figure 2–28.

1 2 ... 61 62 63 64 65 66 67 68 69 70 71 ... 143 144

Sem comentários

Compaq StorageWorks 2/24 - Edge Switch Guia de Instalação Página 66