Compaq Compaq TCP/IP Services for OpenVMS Manual de Serviço descarregar pdf (Página 93)

PING

Sends ICMP ECHO packets to hosts to determine whether they are active. Same

as the LOOP command.

Format

PING [ host ]

[ /ADDRESS=xx.xx.xx.xx ]

[ /ALL ]

[ /FULL ]

[ /NUMBER_PACKETS=n ]

[ /PACKET_SIZE=n ]

[ /PATTERN="hexadecimal-string" ]

[ /[NO]ROUTE ]

[ /WAIT=n ]

Parameters

host

Speciﬁes the host to which the test packets are sent.

Omitting host tests the TCP/IP Services software on the local node, as deﬁned by

the system logical TCPIP$INET_HOST.

Qualiﬁers

/ADDRESS=xx.xx.xx.xx

Optional.

Speciﬁes the IP address of the host to which the test packets are sent.

/ALL

Optional. Default: Not all requests.

Displays all ICMP ECHO_REQUESTs, even if not in direct response to this

operation.

/FULL

Optional.

Numeric output only. No attempt is made to look up symbolic names for host

addresses. This occurs only when displaying ICMP packets other than ECHO_

RESPONSE.

/NUMBER_PACKETS=n

Optional. Default: 4 packets

Speciﬁes the number of packets to send. If you specify 0, packets are sent

continuously until you terminate it with Ctrl/C.

/PACKET_SIZE=n

Optional. Default: 64 bytes.

Speciﬁes the size of the ICMP ECHO_REQUEST.

/PATTERN="hexadecimal-string"

Optional.

Command Descriptions 2–73

1 2 ... 88 89 90 91 92 93 94 95 96 97 98 ... 227 228

Sem comentários

Compaq Compaq TCP/IP Services for OpenVMS Manual de Serviço Página 93