Compaq Compaq TCP/IP Services for OpenVMS Manual de Serviço descarregar pdf (Página 117)

SET CONFIGURATION INTERFACE

Enters information into the conﬁguration database, which deﬁnes one of the

following when TCP/IP Services starts up:

• An Internet interface (hardware connection to the network)

• A serial line Internet interface (a form of hardware connection to the network)

• A pseudointerface (a data structure that extends subnet routing so that, on

the same physical network, an interface acts as a gateway between multiple

subnets)

Related commands: SHOW INTERFACE, SET INTERFACE

Applies to: Routing

Format

SET CONFIGURATION [NO]INTERFACE interface

[/[NO]ARP ]

[/[NO]AUTO_START ]

[/BROADCAST_MASK=IP_address ]

[/C_BROADCAST_MASK=IP_address]

[/C_NETWORK=IP_address ]

[/[NO]CLUSTER=host ]

[/COMPRESS=options ]

[/DESTINATION=IP_address ]

[/[NO]DHCP ]

[/FLOWCONTROL ]

[/HOST=host ]

[/[NO]LOOPBACK ]

[/NETWORK_MASK=IP_address ]

[/[NO]PRIMARY ]

[/SERIAL_DEVICE=device ]

Restrictions

This command requires:

• OPER privilege

• Read access to the hosts database

• Read access to the networks database

• Read, write, and delete access to the routes database

Every host on the same network must have the same network mask.

Parameters

interface

Required.

Speciﬁes an interface name for the communication controller, such as RF1, RT1,

ZE0, XE0, SL0, SL1, SL2, PP0, PP1, PP2. Refer to the chapter on conﬁguring

network interfaces in the HP TCP/IP Services for OpenVMS Management manual

for more information.

Command Descriptions 2–97

1 2 ... 112 113 114 115 116 117 118 119 120 121 122 ... 227 228

Sem comentários

Compaq Compaq TCP/IP Services for OpenVMS Manual de Serviço Página 117