Compaq Armada 1120T Guia de Resolução de Problemas descarregar pdf (Página 113)

IMPORTANT: When replacing the system board, the screws must be replaced as

follows:

1. Install screws [1] and [2] on the system board before replacing the

remaining system board and battery contact screws (Figure 5-52).

PC Card (PCMCIA) Assembly

The PC Card assembly consists of the PC Card clip and PC Card rails. To

remove the PC Card assembly or to remove part of the assembly, follow the

steps below.

Removing the PC Card Clip

To remove the PC Card clip, follow these steps:

1. Turn the computer off and remove all external devices, including the

battery pack and the AC Adapter. Remove the diskette and PC Card, if

installed (Section 5.3).

>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> CAUTION <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<

The computer becomes top-heavy when the keyboard assembly is removed and

the display is opened. To prevent damage to the display and the computer,

ensure that the display assembly is opened at a 90-degree angle.

>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>><<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<

1 2 ... 108 109 110 111 112 113 114 115 116 117 118 ... 197 198

Sem comentários

Compaq Armada 1120T Guia de Resolução de Problemas Página 113