Compaq PC CARD ADAPTER Manual do Utilizador descarregar pdf (Página 34)

4-6 CHAPTER 4: STANDARD INSTALLATION AND CONFIGURATION

4 Use the arrow keys to scroll through the list of valid

settings for each parameter. To select a setting,

press [Enter].

Press [F1] for information about the settings.

5 Continue this procedure with any other parameters that

you want to change.

6 To save the new settings to the NET.PCM and the

PROTOCOL.PCM ﬁles, press [Tab] to highlight <OK>.

Press [Enter].

This completes the parameter changes for the selected

setting(s). The next step is to install the network drivers.

See Chapter 5.

Saving Settings to Use for Installing Other Adapters

If you want to use the same settings on other adapters, you

can save the conﬁguration settings to a .SET ﬁle stored on

the copy of the TokenDisk diskette. To save the settings,

follow these steps:

1 Complete steps 1–5 in the previous procedure.

2 Select Save under the <File Options> command button in

the Adapter Conﬁguration dialog box.

3 Use the arrow keys to select the directory where you

want to save the ﬁle.

4 Press [Enter].

This saves the settings to the selected directory.

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 75 76

Sem comentários

Compaq PC CARD ADAPTER Manual do Utilizador Página 34