Compaq Portable 486 - Notebook PC Especificações descarregar pdf (Página 78)

4. Place the display assembly screen down on a soft, clean surface.

5. Using a Phillips screwdriver, remove the four screws securing the display

assembly to the backlight assembly (Figure 5-22).

6. Carefully release the display assembly cables from the four corner

brackets (Figure 5-22).

7. Release the five tabs securing the backlight assembly to the display

assembly (Figure 5-22).

To replace the backlight assembly, reverse the steps in the above

illustration.

>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>><<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<

CAUTION

When installing the display assembly cables into the four corner brackets,

ensure that the cable wires are not pulled, twisted, or pinched.

>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>><<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<

NOTE: When replacing the backlight assembly, align the five tabs with the

display assembly.

Display Inverter Board

To remove the display inverter board, complete the following steps:

1 2 ... 73 74 75 76 77 78 79 80 81 82 83 ... 87 88

Sem comentários

Compaq Portable 486 - Notebook PC Especificações Página 78