Compaq MP1200 Guia do Utilizador descarregar pdf (Página 53)

7–4 Compaq iPAQ Microportable Projector MP1200 User’s Guide

Care and Maintenance

Follow these steps to replace the projector lamp module:

1. Turn off the projector by pressing the

Power/Standby

button on

the top of the projector.

2. Allow the projector to cool down for at least 30 minutes.

WARNING: The lamp assembly operates at a very high temperature. To

reduce the risk of personal injury, allow the projector to cool down for at

least 30 minutes before opening the lamp cover. Never open the lamp

cover while the projector is operating or when the lamp is hot.

3. Disconnect the power cord.

4. Carefully turn the projector upside down.

5. Use a coin or flathead screwdriver to remove the screw

from the lamp cover.

6. Lift the lamp cover

and pull it out at a 45-degree angle

261799-001.book!!Page!4!!Thursday,!April!25,!2002!!3:13!PM

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 66 67

Sem comentários

Compaq MP1200 Guia do Utilizador Página 53