Compaq dx2818 - Microtower PC Especificações descarregar pdf (Página 105)

9. Push in the latch holding the drive cage upright (1) and lower the drive cage all the way down

(2).

Figure 8-13 Lowering the Drive Cage

10. Connect the SATA data cable to the red system board connector labeled SATA4.

11. Connect the power cable (1) and data cable (2) to the rear of the optical drive.

Figure 8-14 Connecting the Power and Data Cables

12. Replace the front bezel and access panel.

13. Reconnect the power cord and turn on the computer.

14. Lock any security devices that were disengaged when the access panel was removed.

The system automatically recognizes the drive and reconfigures the computer.

Removing an External 3.5-inch Drive

CAUTION: All removable media should be taken out of a drive before removing the drive from the

computer.

Drives 95

1 2 ... 100 101 102 103 104 105 106 107 108 109 110 ... 161 162

Sem comentários

Compaq dx2818 - Microtower PC Especificações Página 105