Compaq StorageWorks 4000 - RAID Array Guia do Utilizador descarregar pdf (Página 69)

Compaq StorageWorks RAID Array 4000 User Guide

5. Twist the latch that is holding the daughterboard to the RA4000

Controller 90 degrees to allow the standoff to pull through the controller

board 1.

6. Carefully pull the daughterboard away from the controller board 2,

unplugging the signal connectors.

Figure 4-19. Removing the daughterboard

7. Align the connectors of the new daughterboard with the controller

board; plug the daughterboard onto the RA4000 Controller 1. Be sure

the connectors are fully mated by squeezing the boards together at the

connector side.

8. Align the plastic standoff on the daughterboard with the slot in the

controller board. Push it through and rotate the latch 90 degrees to lock

the board in place 2.

1 2 ... 64 65 66 67 68 69 70 71 72 73 74 ... 179 180

Sem comentários

Compaq StorageWorks 4000 - RAID Array Guia do Utilizador Página 69